L107 Wave pattern texture agent for indoor
Obtain texture like wrinkle, reticulated, vein, and sand texture
L107 is also called as watermark agent. It is a kind of metal organic complexes which has a strong effect of curing acceleration, making the gel time very short and the coating has no time for leveling, thus can produce the well-distributed wrinkle pattern like ground glass. After the formula is adjusted, it is can produce sand texture, wrinkles and turtle shell textures.
Appearance: light yellow powder
Melting point: 192-197 °C
Solid content: ≥98.5％
Used for producing wrinkle finish effect, or other art powder such as sand texture and turtle shell texture.
3.Use method& characteristics
1. Dosage: 2-3%. Mixed with other materials and extruded.
use little 6:4 polyester to make texture big
Can reduce to 2
Dosage: 4-5% of epoxy
Pigment and filler
Small dosage filler gets big texture, vice versa
L88 leveling agent
eliminate pitting and bright spots
● Extruding temperature: 90-100 °C, the rotate speed of vice mill can be adjusted small, through 140 mesh sieve. Due to the strong effect curing acceleration of L107, please extruding with low temperature
●Take above formulation as base powder, than dry blending 0.1-0.2% L118 turtle shell texture agent can obtain turtle shell texture or snow pattern.
●Spray thick thickness for big texture, otherwise, the coating will be shining; or spray thin thickness for small texture. Curing condition: 200°C/15min.
2. Used in hybrid or pure polyester system can get the effect of wrinkle and sand texture.
3. L107 can also use as dry blending. Dry blending L107 will consume smaller dosage compare with extruding, and the texture more coarse.
4.Try to not breathe the product dust for a long time, or else will arise symptoms feel like common cold. After disengagement of dust exposure, the symptoms will disappear in one week.
Kraft paper bag (polyethylene liner). Net weight: 25kg/bag.