Wrinkle Finish Agent For All Kinds Of Powder Coating

Wrinkle Finish Agent For All Kinds Of Powder Coating

Product Details

Floating Agent L101 

The main component in floating agent is acrylate polymer belong to surfactant class. By adjusting surface tension and form tension gradient, produce uneven surface, that is, form wrinkles, hammer and art pattern effect.  Its charge and proportion are adjusted to the line with powder. Improve the re-spray effect of recycled powder.

1.Technical parameters 

Appearance: white powder  
Ingredient: acrylate polymer  
Softening point: 120-130 °C  
Solid content:99% 


Used in all kinds of outdoor and indoor powder coatings. Produce wrinkles, hammer, turtle shell texture and art pattern. 

3.Use method 

1.Dosage: 0.1-1%, recommend dosage is 0.3%. External mix, after base material is finished, mix floating agent externally. Adding much dosage gets small wrinkles; adding little dosage gets big wrinkles. Coarse floating agent gets big wrinkles; thin floating agent gets small wrinkles.  
2.Adding method: can be mixed with the machine, or mixed by hand, or ground together with film materials. 
3.If some 2-methylimidazole is added in bottom powder, the three-dimensional effect of wrinkles is stronger. The dosage of 2-methylimidazole is 0.02-0.05%. 


Store in cool and dry place. Keep away from fire and heat sources. 


Kraft paper bag (polyethylene liner). Net weight: 25kg/bag 

6.Similar product

101F floating agent: Obtain better wrinkle effect, but should spray thickly. L101F can dry blend with wrinkle finish powder to obtain moire sharp. 
102 wrinkling agent: Obtain same effect with L101 by dry blend, dosage 0.05-0.2%. 
104 specific floating agent: Obtain better wrinkle effect. It is suitable for thick workpiece and casting coating. When using it, must be careful and use it separately